Dougy's S60R by dougy

7 minute(s) of a 367 minute read

new boost sensor to keep up with the demand. all OEM volvo mounting hardware...lol

6-23-2016

well i jacked up the R to change oil and it looks like couple of my crank and cam seal might be leaking...i should have listened to those expert advisers that are capable to change their seals at anytime but yet they recommend to everyone not to change them if they are not leaking...i should have listed and took my chances with old seals and i could have saved like 100$ .

magnet looks great on the oil plug for taking it east for 3000 miles...

6-24-2016

no one even goes there anymore....lol...here is that oil leak...

lol, every mod i do adds weight , thats why my R is 4000 lbs empty...haha...it's a BBK for 850/c70/v70/s70 that im selling...cause i made my own BBK...why? cause two piece rotor are too light

http://forums.swedespeed.com/showthr...70-850-shipped

http://volvospeed.com/vs_forum/topic...e-850/?page=11

those nut are not necessary...i tested it without nuts in sorta of extreme conditions and then i took it all apart to paint and since the bolts were long/sticking out I slapped them on just to add some MORE weight.

thanks...it's actually faster than it appears ,as most locals find out ... did 5 different pulls with 2014 audi S4 stage 2 that does 11.8 on 1/4 mile , was pulling on him every time ...


here is one that starts at 60 for you and it is 3 miles short of 100 so add .3 to 5 second time...so your 4t4 is a lag which means slow.

6-27-2016

i sure miss my 450awhp complimentary pooper scooper.

7-14-2016

7-15-2016

yeah...super bored when it comes to s60r ... did updated my 93 gas tune to ID1000 's injectors on the s60r with hilton... stayed busy with my 850 and c70 by making another BBK for c70 using same as 850 setup , R rotors and 2014 boxer's calipers shaving some of off the spindles and making custom brackets...just waiting on brake lines now.

8-5-2016

hepta gauge pod......not all together but still...lolol

8-7-2016

trying to stretch this project as long as I can...rerouted and rewired every gauge , put a dedicated fused line to all of them ...still have to weld 2 bungs and solder everything up...

Boooost
AFR
Engine oil temp.
Engine oil preassure
EGT
Transmission Oil temp.
Air / Intercooler In and Out temps

8-10-2016

finally supper happy...got my spoiler lip from Netherlands.. it came custom painted titanium gray 455 ...oh so happy , the R will stay grounded.