66 Volvo P1800 Custom Build ( Pro-Touring Ls1 V8, Body Mods, and Flush Mount Glass) by Iamtheonlyreal1

2 minute(s) of a 136 minute read

Time for the Masking tape update... I have worked in the top of the arch's transition to the fender.. I think it is pretty close, and it was a complete pain in the ass.. The hard body line has to transition into the arch, while the roll of the fender had to blend into the arch radius.. Lets just say it wasnt done in one piece, as I had hoped.. There will be some final jacking and tweeking to the actual fender opening when the car is on the ground with wheels installed.. Right now, it is damn near impossible to get any symmetry from this view position.

Here are the before pictures with the wheel set at ride hieght.. Please remember the offset of this wheel is not correct, and has it pushed too far out.





Here are the after pictures..