Mk1 getting some glitter back... by fredybender

2 minute(s) of a 214 minute read

My plans are to paint with POR15 both the underneath, and the floor inside the car. Afterwards, some seam sealer over the seams & beige rubberized undercaoting (available here at our friendly Canadian Tire store) I did some research on the undercoating, and it seems that 3M #08883 is the best, but its black, but I would like to keep the beige color like stock...

I have about 25-30 hours of welding / fabricating done, and about the same amount to go...

I should be done by the week end (I'm off work this week... Well, kind of...)

A bit more progress for today: finished the day a bit early, as I'm leaving to go see the Hockey game against the Thrashers : GO HABS GO!!!

FYI the rear panel from the Rabbit from Klokerholm, can be modified & adapted to firt the Rocco:

A bit of cutting & shaping needed, but a good platform to start with.

The oversized wheel arched available from Belgium, also fit the rear lower panel OK... (see second to last picture)

I am also testing the beige undercoating that ressembles the stock color. under the undercoating, a nice coat of silver POR15...

On with pics...