You must be logged in to rate content!
5 minute(s) of a 131 minute read
2-22-2009
Lent me a GT3071 yesterday to check if the clearance was good with this one..
I think i will go for external wastegate,any tips where i can buy on the net?
TIAL,Turbonetics?
Wiring..
4/10/2009
And then a small update..
Now I am finished with wiring up the power for the Haltech..I met some challenges in the wiring harness diagram,but with some help from some buddys it got in place
I still miss some sensors (water temp,crank sensor,home signal) to finish up the wiring in the engine bay..
I have also wired up some new 4-quadrat cables in case of powerloss back to the fuel pump.
4/30/2009
The project has not stopped Ordered some more parts today:
- GT3071R with T3 housing(.82AR) with 3" v-band outlet
- Tial 38mm Wastegate w/SS flanges
- Setrab 330mm 19-row oil cooler
I Also have bought in tires for the Compos,Pirelli P-Zero with 195/40 rubber
With some good willing the car will be back on the wheel in a couple of weeks, I hope
5/19/2009
Got the rabbit back on the wheels today,mounted up the front suspension with KW shocks and all the other new parts..
I need to buy new steering linkage for the steering rack,it was pretty f¸kked upp
I hope to get down the rear suspension tomorrow and renovate it also..Maybe some blasting should do it..
Face down,ass up:p
Got my Compmotives back today,with new Pirelli P-Zero 195/40 tires
Prasie the lowered!
Thats all for now
5/20/2009
Mounted the rear suspension in today..
I need to take it down for blasting at a later time when the car lifter is not occupied
Seems like i neeed some spacing in the back here
Hummmm..
And with the brakes,I have room for some larger discs also
And ready for some new pipelines with 2,5/3" V-bands..I only need the turbo and the WG now,so I can start
6/9/2009
The turbo and the Wastegate has finally arrived,so new downpipe is on its way..Pre- modified/welded for later TIG weld..
Wow great build! ????
Posted by Diggymart on 7/5/19 @ 4:54:46 PM