You must be logged in to rate content!
2 minute(s) of a 36 minute read
6-15-2020
I started in June 2019 and have made a 1.8 Turbo Mid engined Triumph Spitfire. As of the 15 June 2020 the metal work is just about finished, now to start getting the body super smooth and painted..
6-6-2020
Short shakedown drive in the mid engined Triumph Spitfire My car is just about finished now, so time to test it all works.
7-13-2020
I decided to bite the bullet and do a talk about my cars, especially the Spitfire. Yikes!
7-16-2020
The door was rotten, so I cut the rot out and replaced with new metal, here are some pictures of the process..
I’m running out of things to do, all the welding is done, electrics done. The doors are repaired, exhaust exit covered, indicators fitted, lights working, loom connectors fitted and gm to Audi Fuel sender adapter in a little box with a led :) Just bondo and sanding (then paint)
Comments
It's good to see someone modifying a triumph - the time put into sorting the panel gaps has paid off!
Posted by Jim_builds on 10/26/20 @ 1:10:48 PM
What a transformation! If Triumph were making cars today I could see them building something like this.
Posted by CCmyVW on 10/25/20 @ 1:14:55 PM
Wow impressive!
Posted by Diggymart on 10/11/20 @ 2:08:22 AM
You really are an artist with the welder. Looks like a modern version of a classic design. Well done!
Posted by miatamatt on 10/9/20 @ 1:07:39 PM
Nice work! definitely not something you see everyday.
Posted by MPower on 10/1/20 @ 7:51:48 PM
Beautiful car, bet it’s a riot to drive
Posted by stevegolf on 9/26/20 @ 3:33:18 PM
Great to see this again!
Posted by Diggymart on 3/7/21 @ 5:47:46 PM