You must be logged in to rate content!
2 minute(s) of a 127 minute read
11-9-2017
not much more sanding to do on the actual shell, 1 door boot and front end still to do
Welded up and smooth in so far ariel hole in quarter panel and mirror hole in door
11-10-2017
decided to do a half day at work to get the shell finished prep wise
thumbs down due to being 8pm on a friday
but the shell (from a pillar back) is ready for isolator tomorrow, 1 door and rear bumper need abit more minor prep in the shut spaces and spoiler so they could get painted too tomorrow and boot and other door in due course
11-16-2017
i bloody hate bodywork, isolator
primer, sanded 240 then 1200 few tocuhes up done to it
matt black, not a perfect job, few dust particles etc but I'm not after a perfect finish as its gonna be driven, paint will dull more overnight as this was taken about 30 mins after 2nd coat
Comments
I bet the purists probably don't like this, but screw them! This thing looks like a blast!
Posted by stevegolf on 10/22/20 @ 11:15:40 PM
This thing is insane. Definitely not a swap I would think of doing, but it looks like it will be a blast to drive. I like the mad max look you have going too.
Posted by MPower on 10/1/20 @ 8:26:26 PM
Wow thanks for sharing!
Posted by Diggymart on 9/20/20 @ 2:50:40 PM
This is my kind of build right here. Very nicely done!
Posted by Squonkwerkz Garage on 9/28/21 @ 2:07:53 AM