Mk4 toyota supra cummins diesel build

By whitz
( 6 )

2 minute(s) of a 127 minute read

5-17-2017

after alot of hassle with handbrake cables manage to get one off a st205 which is identical after alot of searching

All new cables fitted along with shoes, springs, retainers etc and a good scrub up

recon'd calipers fitted red paint stripped and gone to VHT black, new pads and fitting kit for good measure, ground the celica off the caliper now worth £100 more per caliper, I'm not even joking the scene tax is a joke

slapped the bonnet on just to get it out of the way, will end up with a few holes in it


5-21-2017

Not much of an update due t oa few car shows, but pulled the gel stickered toyota off the roof along with the really crap paint job, so guess what loverly job I'm about half way through 


5-29-2017

all front suspension including subframe removed cleaned prepped wishbones painted all graesed and back together, including shultz under both sides

4pot calipers fitted on the front, paint can blocked solid so will paitn another day also put the discs on the wrong way so gotta come off again

toight



Comments

This is my kind of build right here. Very nicely done!

Posted by Squonkwerkz Garage on 9/28/21 @ 2:07:53 AM

I bet the purists probably don't like this, but screw them! This thing looks like a blast!

Posted by stevegolf on 10/22/20 @ 11:15:40 PM

This thing is insane. Definitely not a swap I would think of doing, but it looks like it will be a blast to drive. I like the mad max look you have going too.

Posted by MPower on 10/1/20 @ 8:26:26 PM

Wow thanks for sharing!

Posted by Diggymart on 9/20/20 @ 2:50:40 PM