project ae86 3sgte :) by marley4us

8 minute(s) of a 221 minute read

Here is some info to help others do LED tails for them self

After you have your tails apart and mounted the leds, here comes the wiring. 

Supplies:

Crimper

wire cutter

Diodes 3amp 50piv

resistors 220ohm

male bulb with 3 wires

here is a pic of it wired up for high and low beam

take the two power wires, for high and low beam. put Diodes on the (make sure to have them facing the direction you want the current to flow)

On the low beam wire, put a resistor on it. 

Connect highbeam to high beam

low beam to low beam

and ground to ground.

Boom your done

Some pics playing with the track rims I have laying around

PS I also finally ordered my 2200cc injectors from TCS for my mr2, hopefully they will get here soon, so I can have my tuner tune my car already hahhahaah!!!! big HP here I come

3-21-2014

My bday is coming, and I got myself a few things: 

Oil cooler

ID 2200cc injectors for my mr2, and a new tune on E85

I am still waiting for some other random little things to come in too

I got to figure out where is the best place to mount this thing lol

4-3-2014

Not a much has gotten done to the ae86. But the MR2 is almost done with my fuel revamp!

Got the Car at Agressive Performance, Sue is taking good care of my baby, there is even another widebody to keep mine company they meet in Socal befoer hehehe

Injector Dynamics 2200cc (210 pound) Topfeed injectors

Getting a Walbro 416 installed, Larger Return lines, and Tunning!

Giving a walbro 255 to my buddy xene for his Alltrack! since I wont need em anymore.

Also I finished my Tirerack, painted it, and threw on some stickers I had laying around from my car builds.

4-21-2014

got the 50mm rca's in, but just noticed they where rubbing a little on my control arms onto my rotor... Fudge!!! so I "rolled the edge of the control arm a bit so I would have clearance! what a Pain in the ass...

Replaced my back wheel stud, since one of the threads was messed up

swapped over to my Konig- Watanabe replica rims.

Put the side skirts back on, front bumper, rear bumper etc. 

Man am I tired, but now I can make room for my buddies 71 Elcamino and we can put together his 454

got the 50mm rca's in, but just noticed they where rubbing a little on my control arms onto my rotor... Fudge!!! so I "rolled the edge of the control arm a bit so I would have clearance! what a Pain in the ass...

Replaced my back wheel stud, since one of the threads was messed up

swapped over to my Konig- Watanabe replica rims.

Put the side skirts back on, front bumper, rear bumper etc. 

Man am I tired, but now I can make room for my buddies 71 Elcamino and we can put together his 454

I love when ____ comes in the mail!!

6-3-2014

Got some T3 Power steering knuckles and outer tie rods

Still working on her.... man so many little details and bugs... ____

List: 

1)Cold start idle issues....

2) drill bolts for rear sway bar

3) install my Poly Bushing EVERYWHERE

4) Install T3 power steering knuckles and outer tie rods

5) Mount Bumper better...

6) get fuel cell made for Nissan sending unit

7) bushing for rear right coilover

8)buy tires for track rims

9) still need to get her painted

....So much work...

So I had to do something a little more Eye Candy wise

New Track rims, 15x9 neg15 on all four. 

11-14-2014

Been too busy, I need to change my intake manifold gasket, and I need to fix the FPR, and of course to add to the list I buy more stuff lol

Got a GT28RS I could not say no too

and some Lugs