You must be logged in to rate content!
3 minute(s) of a 43 minute read
12-10-2014
small update:
Front suspension back on -
Header modified so it would fit:
9-16-2015
After about a year break I started working on the car again..
The gas tank was removed and I swapped the S2000 fuel pump into the corolla bracket. It fit perfectly like it was meant to go there.
S2000 fuel pump & sending unit - original Corolla pump - S2000 pump installed in corolla bracket.
The S2000 pump is much smaller
I was even able to swap the S2000 sending unit to the Corolla bracket and use the corolla arm. It should read the level perfectly to the S2000 cluster.
Next I made a block off plate for the air pump diaphragm since the rest of the air pump system was deleted. Pretty simple - trace the gasket onto some aluminum, cut it out.
Then I got all the brake and clutch hydraulics installed and bled.
I've been making some good progress lately, hoping to keep up the momentum.
What a project!
Posted by Diggymart on 1/20/20 @ 9:44:04 PM