You must be logged in to rate content!
3 minute read
Fog Light Covers
Compliments of Jenovuh @ www.nasioc.com
Hey everyone just making this quick guide on how to do it, it is pretty easy and kind of self explanitory, I know for myself I was nervous to just start tearing stuff apart. Hopefully this will put your mind at ease, or help you visually see what to expect or something...
I didnt see any thread like this yet but I did see a post or two asking for one. If I am wrong I apologize in advance. Just trying to contribute 
Ok! So All you really need to do this is a flat head screw driver, and your covers.
Start with whitch ever side you want to do first in this case I started with the drivers side. I looked around the edges of my stock fog light covers to try and get an idea of where the tabs were that I needed to press up onto to pop them out.
Once I found a few of them I gently placed the screwdriver in the edge of it and applied slight pressure, just enough to pop the tab out of its place and moved down the line. After about 3 - 4 tabs you can wiggle the last few out.
Then you will end up with this
There will be a longer tab on the covers about an inch or two long that was the first tab I put in and then just popped the rest of them in gently.
Resulting in:
Repeat the same thing on the other side.
And voila you are all done! Now that wasn't so bad was it?
Hopefully this helps out in some way!