You must be logged in to rate content!
2 minute read
GAUGE HOOD INSTALLATION Nissan Sentra 00-06
1. Remove the hood, 2 screws hold it in. Pull the top out
2. Rotate the wheel and hood at the same time, hood will pop right out.
3. The wrap will come out of the box and lay over the factory plastic panel. You will need some clamps and contact cement:
4. Take some time to get a plan of attack and an idea of where the leather will want to bunch or pull away. Then get started with the cement. I chose to do the flat upper panel first and clamp it in place until everything was dry. That allowed me to get the seam lined up and know that it wouldn't move later on.
5. The bottom part around the steering column is a challenge but nothing that some patience and time cant fix.
6. Reinstall in the reverse order as you took it out...remember to cut the holes for the 2 screws.
Useful tip
You have installed a product made out of genuine leather. As you know, to maintain a leather product in good condition, you should take care of it. We suggest occasionally (every 4-6 week for example) applying some leather conditioner/UV protector to keep your leather from drying up in the sun and cracking.
Redline Automotive Accessories Corp. will not be held liable for any labor, incidental or consequential damages of any kind. Proceed at your own risk.