You must be logged in to rate content!
3 minute(s) of a 90 minute read
4-6-2012
Picked up the COZ Akebono brackets yesterday. I have eBay brackets but am replacing the rotors and figured it couldn't hurt to get quality brackets. (not that I had any issues with the eBay ones)
Also got the oil pressure gauge finished.
Oil temp sensor:
Pressure sensor:
The stock gauge is 10lbs high at idle and up to 30 at high revs. I am not running over 120lbs, at wot it is near 100.
Picked up the COZ Akebono brackets yesterday. I have eBay brackets but am replacing the rotors and figured it couldn't hurt to get quality brackets. (not that I had any issues with the eBay ones)
Also got the oil pressure gauge finished.
Oil temp sensor:
Pressure sensor:
The stock gauge is 10lbs high at idle and up to 30 at high revs. I am not running over 120lbs, at wot it is near 100.
I agree drilled is not my preference. The fact is the description said drilled. I hoped it was not drilled which was what the part number referred to.
If I get 5k+ out of them I'll be happy.
They look cool! :P
This is at cold start up this morning.
The stock gauge is very high.