You must be logged in to rate content!
3 minute(s) of a 210 minute read
1-16-2013
1-16-2013
Oh, sweet!
On another note, I have to get the Evo in tip top shape because my daily consumed a full oil change in 600 miles with no leaks......
2-11-2013
On 93 the response of the Green over the 30r wouldn't be worth losing for maybe a few HP up top, if any. Just my opinion though.
Green on 93:
30r on 93 with the same supporting mods/cams:
Yes, the Green ran 5# more, but it just seems that the 30r's don't perform well enough on these cars to justify the purchase, seeing as you have similar response and make a ton more power with a 35r on a .63 housing.
I had to weigh the exact same choices you're making, and honestly, you can get the response of a Black out of a 3586 if you have the right turbo kit and supporting mods, while making a ton more power up top too.
Also taking into consideration, I paid $1500 for an ENTIRE T3 setup with an HTA3586, ready to go....A used JB FP Black sells for that, and isn't half as reliable as the 3586, not to mention you can sell your stock frame stuff and knock half the price off the T3 kit.
For the reliability, the potential for future upgrades, and price, I don't think I'd ever put a stock frame turbo on my car.
I didn't bother tuning my car on the IX turbo. I just kept it on there for putting around while I saved up to go T3. 400/400 would be a nasty potent street setup though that's for sure!
If you do go T3 I would highly recommend getting a HAFE cast kit like I got or having someone build you a small tube header, because both will spool ~400rpms faster than a normal tubular manifold, make a boat load more torque, and won't become a restriction under 700whp or so.
For intake manifold I would highly recommend looking into Curt Brown's Extreme Ported stocker. It made 40whp more at 4500rpms than the legendary ported Skunk 2 and still made 3whp more up top on an FP Red. Just food for thought.
Good luck with your build!