The 1991 Neon Restoration Once Again! by josh.evans

By diyauto
( 2 )

3 minute(s) of a 72 minute read

1-24-2010

hi i have fitted the heater back in for about the 3rd time will run the engine to make sure it is not leak finger crossed. also i have stonechiped the hole internal floor pretty pleased with the finish.

here is a picture


2-3-2010

cheers lads for the comments i have put the heater in and finally it doesn't leak yay!!:D lol. and i have put a second coat of stonechip inside it has dried now so i will get a more up to date picture of the floor as it is matt colour now. well next thing really is to get my door sorted need new 4 new studs welded on and then couple of holes welded up. then more filler work when it gets a bit more warmer. so yep cant really do much yet but my dad is aiming to spray in in around may time

cheers


2-17-2010

hi sorry i havnt really posted anything for a while well i have just brought another drivers door as i gave my door to some1 so that he could repair the bottom but he couldnt do it as it was just too thin so i thought i would just get a new 1. so i have got 1 coming friday from a member on here its been re skined and bottom has been repaired and its in primers so all good. also today i recieved my fibreglass sportspack arches which are ace much better than the crappy rubber ones. so now i got to fill all of the orginal arch bolt holes in am ordering some fiberglass bridging filler tomorrow so i will post some pictures of that when i do it. also i am getting new studs welded onto the passenger hinges.

will post pictures as i do the stuff


2-21-2010

hi heres a few pictures Also i have bleed the brakes which are working fine yay!>_<.

my nice new rust free door:


Posted Image

and pictures of the car with doors and latest bits ive done to it.


Posted Image


Posted Image



Comments

Wow! What a project !

Posted by Diggymart on 2/14/20 @ 6:24:04 PM