Project Trig - After 18 Months Away, Is Back In Town! by Mini 360

2 minute(s) of a 461 minute read

Had some spare time at lunch today so I took advantage of being a Draughtsman with CAD at his disposal and threw this together. All from memory and Doms are all over the shop but I will update with accurate dims in time. This is all to begin planning some rather significant suspension mods and I want to do it in 3D before spending any money.

9-22-2016

With the new wheels being the incorrect PCD, I looked into wobble bolts and due to Mini wheels not being hub centric, and 3.8 UNC wobble bolts not being available I am going down the machined hubs route. I have contacted KAD who are willing to make custom alloy drive flanges/rear hubs to accomodate 4x100 and 4x101.6 (4x4") PCDs. 

So as I am trying to model up the entire Mini running gear in CAD for my college graded unit, I created this.  All dims currently from memory until i can get one removed from the car but it proves my concept.  Offset PCDs that don't interfere with the mounting bolt holes.

Added inscriptions so the correct PCD can be located easily, so I can change the studs over depending on what wheels I want to use.

and with the 4x100 studs in place.

Going to wheak the drive flanges off the car over the next couple nights at some point so i can model them up correctly.