George's Minibusa by GeorgeMini

2 minute(s) of a 37 minute read

So I did a little bit more work today :) 

Firstly I replaced the driver side scuttle pannel.. out with the old, in with the new. That felt good and was something I had been meaning to tackle for a while! 

I was debating leaving the race tunnel until I had the rear frame but it can only really go in one place so after a bit of angle grinding goodness, I had it squared up and welded in place! Yes, i did go overboard on the welding, but I actually used it to home in my welding skills a bit so was a good bit of 'practice' if you like.. 

Next, I fiddled about with the flip front hinges which was a total pain in arse!! I am going to need an extra pair of hands to help get the fiberglass front end fixed into position and aligned properly because there are too many things to hold and balance on my own to do it well. Anyone want to help?! Tea and biscuits are at there best here ill have you know.. 

Oh and here is a sneek peek of the rear race frame at zcars, just got to do this one small thing called 'paying' to get that on its way to me but here you go anyway. 

P.S. never use Plusmod Mini. They are the UK branch of Minitec and I have found them impossible to deal with.. wont answer phone calls or return emails. It took nearly 3 months for my hinges to show up!!