92 City, My First Rebuild by big-jay

4 minute(s) of a 358 minute read

Thanks Jared !

Update,

Managed to get a quick hour on the mini today, done a bit more sealing.

Taped up ready for the sealer -







Applying the sealer -





Tape removed -













Overall shot of where I'm at -



Should get a good few hours in tomorrow so will hopefully get this underside finished off !

7-18-2014

Update,

Finally got round to packaging up my wheels ready to be sent off for the split rim conversion by force racing. I'm going for the 6 inch rim, then it's just a case of choosing a colour when I get round to having them refurbished. I'm thinking gloss black !

Anyway heres a few pictures of them being packaged up.

Bottom layer -



Top layer -







So, when I get these back they should have a nice big shiny dish on them

7-21-2014

Update,

Finally finished cleaning the underneath up. Here's a few pictures.

L/H jacking point closer sealed up -



Same treatment for the R/H side -



Boot area sanded down, treated, zinc primed, then a coating of regular primer applied -



And sealed up -







Flipped back onto her belly -



So glad I've finished that now, started to become VERY tedious towards the end. Was definitely worth doing though !

Also, I finally received my bonnet from Minispeed, and I also picked up two new wings from Minispares -





Just got to source a decent passenger side door frame and then I can crack on with the front end !