92 City, My First Rebuild by big-jay

3 minute(s) of a 358 minute read

Parts Update,

Arrived home from work today to be greeted by a nice big package from M-Machine !





Wasn't expecting a Heritage companion bin but I'm not complaining

Should be making some progress with this little lot over the weekend so updates ahead !

2-1-2014

Update,

Thought I'd finish the Flitch off today so me and my dad got straight to it.

Removed the windscreen -



And then removed the scuttle as I'll be replacing this with a new Heritage panel, not going to use the scuttle corner repair I picked up from Bingley, don't know what i was thinking when I bought that -



Drilled out the spot welds -



Discovered more of the brown stuff -



Sanded and Kurust applied -



Zinc Primed -



Top coat for protection -



Then we made a piece for the top of the Flitch -



Final trimming and the bend added to the piece, then primed and top coat applied -



Welded in -



There was also a small hole at the top of the inner wing, as you can see above, so we made a small piece and welded that in -



Inside -



That all we got done today, big update for such a small repair I know but it's these repairs that seem to take the most time. Going to replace the inner wing lip tomorrow and then I might remove the rear subframe in preparation for repairing the heel board.

That's all for today !