92 City, My First Rebuild by big-jay

2 minute(s) of a 358 minute read

Update,

Nothing major but an update all the same. Got some seam sealing done today around the fresh air vent and flitch panel inside of the car.

Weld ground down -



I split the seam with a large flat head screw driver and flooded it with Zinc rich primer in order to protect it against rust, then closed it back up and primed the rest of the air vent -



Tiger seal applied, not the prettiest but as long as it keeps the water out I don't care -



As you can see I've still got to fabricate a piece for the top of the flitch but will have to wait till the weekend now. Planning on removing the rear subframe this weekend as well so I can start work on the heel board.  

Ive ordered some panels from M - Machine today, RH Rear Floor Pan, Heel Board Repair, Inner Sill Stiffener, and also the subframe closing panel so hopefully that will arrive by the weekend !

Got my dash today but it arrived damaged because of the delivery guys, it's got a small crack in the lacquer in one corner. I think I'll have it repaired though as the rest is in pristine condition and I did get it for a dirt cheap price. Don't think I can be bothered with the hassle of sending it back to be honest !