Another YJ Build......GenRight Style by caddyman

3 minute(s) of a 64 minute read

Here is a few updated pictures.

I had to remake my "C" pillar roll cage frame tie in on the drivers side because of the fuel filler hoses were in the way with the GenRight fuel tank.

I just cut off the original tabs, made one new tab and connected the other side to the rear shock hoop, turned out pretty good even it I say so myself

I bought a new GenRight stubby bumper but I wanted to make my own grill/winch guards. So I started bending tubing and this is what I came up with.

I welded a 1/2" flat strap to the inner edge os the hood that I cut off to stiff the edge up a little and make the edge not so sharp, then grinding it smooth.

I installed a new Poison Spyder drop down tail gate, but really don't like the tramp stamp. One real complaint I have with Poison Spyder is there logo on everything they make, makes me feel branded!

I just dropped a load off to the powder coater.

Next update should be assembly

In this case I was able to easily make my own lower section (tramp stamp)out of aluminum plate and lose their logo.

I have a few friends that have a lot of Poison Spyder products on their Jeep's and it starts to be too many Spyder logo's on the Jeep. Most of the stuff I got was from GenRight, for the most part you wouldn't know just by looking at it.

Now if the PS stuff was really cheap or free, then I would have a different opinion about having it all over my Jeep, but of course it's not so I don't!

Just my .02

Front bumper is all welded up, ready for some color.