90 yj frame swap and build up by lovett86

By diyauto
( 6 )

2 minute(s) of a 84 minute read

1-24-2019

All zip tied together. Looks like a harness again. Will do more with it once it's in the jeep and the engine is back in. That way I can run all my wires to the proper length and wire up the different sensors for it. Found one relay kit in the garage for the head lights. I will have to pick up another along with the new head light sockets



1-27-2019

Didnt find the headlight sockets that I wanted at the parts store so I ordered new one on Amazon along with a new 6 relay,6 fuse under hood box instead of buying another relay with harness. I have lots of relays and fuses. Just needed another relay kit to do the headlight upgrade. Parts should be here in 3 days. Will post pics when they get here.


1-28-2019

Finished tidying up a bit of the engine harness at work between jobs. Then loaded it into the car and will start wiring up the jeep once the weather warms up. -26 this week at the coldest according to the weather man.


1-29-2019

I know this tank came from a yj but I always assumed it was for a fuel injected jeep. I never paid any attention to the wiring before. But it's just 2 wires, 1 for ground and 1 for the level sending unit. Has no fuel pump. So it must have been a 90 or older I'm thinking. I will be running a carbed v8 so I want to buy a new sending unit for it and just need to know what year
of jeep to get one for. Thanks In advance.







Comments