You must be logged in to rate content!
2 minute(s) of a 84 minute read
7-21-2017
A little more welding done today. Got the 2 inner end peices in place
7-23-2017
I cleaned up about a 1" area around the area I needed to weld. Will clean the whole thing up before I paint it. My phone takes horrible pics
1-10-2019
Haven't really done anything in the last year with the jeep. Just moved it in and out of the drive way. Ordered a gasket kit for the dana 300. Started working on the wiring harness for the engine today and seeing about building a new shifter for it
1-12-2019
Cleaned up and degreased the wiring harness for the jeep at work. Going to start removing all of the unnecessary wiring for the computer since il be running a carb set up. I have Monday off from work. Have to do a couple things around the house then I'm spending some time on the jeep again.
Here's a picture of the wiring harness
mostly cleaned up. I already spliced a new trailer wire harness into the rear vehicle harness as well
Also just ordered a new lower steering column bearing kit
1-14-2019
Column bearing kit came in today