Accord325 Dyno Progress and Build

By diyauto
( 3 )

3 minute(s) of a 88 minute read

2-14-2017

Some of my Mods (excludes body, trans, mounts, etc.)-
- Custom DTB intake manifold (dual 3" into single 5")
- RV6 PCD's
- XLR8 J Pipe V2
- 2.5" TSUDO CBE (Dual resonators, Tsudo and Vibrant Ultra Quite)
- J30 heads (decked, ported, polished, rebuilt)
- Stock J30a5 cams
- ported/polished runners
- RDX 410 injectors
- dual core radiator
- Hondata Flash Pro
- 21lb Rota Torques
- 235-45 Mickey Thompson street comps


4-26-2017

Ever wonder what are cars can tow?




12-18-2017

Sorry guys, been off here for quite some time. Ended up getting into the bike game (2006 Zx10r) and that has been taking up most of my time. Finally getting back into my car. Here's the short update as to what's happened in the lapse of time.

I pulled my J37 heads off my J30, installed my ported and polished J30a5 heads back on. Re-dynoed and made 270whp 230wtq. Not bad for this beat J30 with 190k miles. I'm still running my 100shot on my 2nd OEM clutch (70k miles on the clutch). I think that's awesome, all things considered (nitrous and all). 190k miles and still on my 2nd OEM clutch. I do have a Spec 3+ clutch and LWFW waiting to be installed with the J32.

Future Plans - I will be building my J32 come 2018. I have a few touch ups to finish off the J37 heads and have to make up my mind if I will be camming the car or not. If I dont then I will be running J35a8 cams in it. I'm finishing porting two customers IM and runners at the moment and then I will be moving onto my stuff.
BTW - Member on Acurazine I ported IM and runners for made 306whp 270wtq on his 3.7 TL AUTOMATIC! That's pretty good for an auto!!

Ok, I will update as soon as I get going on my stuff


2-10-2018

Pulled my J32 block from storage and found someone spilled mountain dew in the damn cylinder.... lets just say I wasnt happy.
I was able to clean most of it but theres staining on the cylinder wall. I don't feel any raised area with fingernail so I think I'm ok


BTW, Stage 1.5 cams coming in the next month or so. Im stocked!!



Comments

Wow great photos and details. Thanks for sharing!

Posted by Diggymart on 11/14/18 @ 1:39:39 PM