1929 Ford Coupe-Rusty to Solid by Flop

2 minute(s) of a 20 minute read

thanks alot r1lark 

ahhh they know how bad their panels are . ive called numerous occasions when i spend good money on a patch and it fits like garbage . usually they are a good start and need about an hour of tweaking to get it to fit right.

tig is amazing for sheetmetal . the weld is much more flush to the metal then a mig(being easier to grind) also it acts a lot like the orig metal when you are working it with the hammer and dolly and wont crack like a mig weld when hammering on it . 

heres the quarter patch . again about an eighth inch short . 

8-6-2012

some of the last work in this shop!! moving to a new place next week!!

bunch of progress

passenger side finished ! pinholes in door and the under side of the panel in front of the door repaired . wheel well a quarter patch a corner patch and cowl patch !