Twin Turbo Ls powered Zephyr - Stuff out of my mustang by tirefryin_s10

By diyauto
( 2 )

2 minute(s) of a 65 minute read

2-15-2010

not much new on the car front around here.... too busy with customers stuff.



Made a little progress and started fitting the turbo kit..... I am not fancy fabricator but I think it looks ok for DIY crap.





Got the V band welded on the passenger side, You can see how much different the manifolds are based on where the passenger turbo kit is in relation to the hot side piping.


Click the image to open in full size.



Click the image to open in full size.



Click the image to open in full size.


2-18-2010

Did a little on the drivers side of the kit last night :



Got the v band all fitted and the flex welded in also changed the bends on the kit to try and match the other side a little better even being that the manifolds exit in different areas, Still gotta clean up and weld the bottom half as well as build a piece to bridge the gap.



Soon it will be time to clean it all up and coat/wrap it.


Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.


Got the drivers side welded up..... Now I just need to finish smoothing things out and coat/wrap this ****.

Also got my turbosmart Pro port BOV to match my turbosmart gates.

Click the image to open in full size.


Click the image to open in full size.



Comments

Great build! Enjoyed the videos too.????

Posted by Diggymart on 10/18/19 @ 4:06:01 PM