Project 1990 country squire resto/modification by andyfanshawe

2 minute(s) of a 418 minute read

Repeated all he above on the other side, and moved to the front driversside.

Wheel off 

to reveal.......

new caliper, disc, pads and flexy line. Good news.

Well, not all good, because the plastic dust shield behind the disc has melted and deformed

So, the caliper and disc had to come off to extract it.

Order one of those later.

have a look at this photo of the drop link, and more specifically the bushes that have perished.

Something else for the order book!

Have a close look where the link goes through the lower control arm. The hole has worn oval. i will remove that and weld it up in my next holidays (3 weeks time).

Some of my parts should be arriving tomorrow, so I may be able to get the engine together in time for a test run and then the plenum coming off and the PCV valve. grommet and screen to be replaced.