You must be logged in to rate content!
2 minute(s) of a 418 minute read
10-15-2009
One of the interesting things about buying a used car is you dont quite know what you'll find in it!
Under the drivers seat was this tape (tape? whats that then? :dontknow: ). the very best of Foster and Allen.
I have emailed the last owner to ask if he wants it back, and he did. So it went off in the post today. Now how many owners of cars take the trouble to do that?
Anyway, back to the car. The next task is to get the radiator in.
Coolant dropped out again that I put in last night and the hosepipe brought back into play for one last flush through.
Then its out with the new rad and transfer all clips and connectors/adaptors
New and old together
Moving trans cooler connection adaptors over
This is the lower radiator panel that is showing signs of light rust. So, a clean up first
followed by a coat of dinitrol 3125 with this
to get this
Then its in with the radiator
New thermostat fitted and new rad cap.
then the system filled with 50/50 ethyl glycol antifreeze/inhibitor
Heres the coolant colour after an engine run up until the thermostat opens and it all starts to circulate. The heater got warm so it must be circulating well round there. No wet carpets yet either. :yay:
Love this build, so much work!
Posted by diyauto on 1/21/21 @ 1:46:55 PM