By diyauto
You must be logged in to rate content!
2 minute(s) of a 891 minute read
11-30-2017
While I wait for turbos.. I decided to get cracking on real-life alternatorbrackets to test fit this weekend. Took about 6 hours total, but should be worth it. Haven't yet made the 3rd piece which is the side plate that bridges the upper and lower brackets as well as provide a mounting point for a redirect pulley. I want to test fit these two brackets first to make sure their location and offsets are accurate to the LS3 3D model I have.
Read the Full Article:
http://ls1tech.com/forums/conversions-hybrids/980909-lq4-into-3rd-gen-1972-nova.html
Wow thanks for sharing!
Posted by Diggymart on 3/3/19 @ 12:40:25 AM