You must be logged in to rate content!
2 minute(s) of a 891 minute read
7-21-2009
Here's a teaser, it's back inside the garage finally!!! More to come tomorrow...
7-22-2009
Little more progress, slowly going back together...
More progress.... NOT. Neither SpeedTech upper control arm clears the upper mount subframe metal with the Guldstrand mod. Driver side...
Pass side...
It looks like I can get away with only trimming a bit (hopefully!!) but I'm slightly worried that the control arms will contact metal all the way till full droop, and that's a LOT of cutting to do, might have to cut out a lot of the upper mount bracing and re-weld in for more clearance. And I thought I was done with this stupid part.
Although now I can't find it anywhere, I thought I remember SpeedTech saying the arms will work with the Guldstrand mod. And I know that my mod is legit because I got a template in the mail straight from Guldtrand motorsports. Down 0.75" and back 0.25"...
Wow thanks for sharing!
Posted by Diggymart on 3/3/19 @ 12:40:25 AM