25.3 Outlaw Drag Radial Camaro Build by Eddie Krawiec

3 minute(s) of a 217 minute read

Your right we can go in a hack everything off but then!!!!

When I go and race the 275 stuff and other misc classes we don't want the car to fall into any gray areas. Some tracks have rules to prevent you from basically re front halfing the car.

We could have made the front end a tube front clip with stock mounts and frame rails just sitting and doing nothing but it would be a bitch for every race I ever go to on the tech side. This is whay it is done the way it is. We will keep enough to make it work and be stock but be done clean.

1-26-2011

Here is a update on the wheels.

I got the Mickey Thompson Pro-5 Wheels. These things are really nice and true as can be. The only issue is they didn't make a beadlock in a 15" wheel. So I contacted Tommy Kirk of Mac Fab Performance & Beadlocks to put a set on. Tommy and I got talking and I told him I didn't want a beadlock that is like the basic rings and he was glad to hear that. So he did a set of R&D rings for my wheels and they came out great. They will be getting polished tomorrow and sent out to DMC Racing to get fitted onto the car.

Check them out.

It's getting closer. Just working on the fab part of the turbo system and waiting on parts. As we get them in they get put on. This stuff just takes so much time to get in and in most of the build process that is what takes all the time. I hope to have a few pictures of the motor sitting in the car soon. I don't want to have them stop anything to take a few pictures.