Guys project 74 Z28 by olstyle

6 minute(s) of a 380 minute read

Finally got the lips done on the quarter wheels. Boy what a feascoe that was, LOL
Youn can read about it here http://nastyz28.com/forum/showthread.php?t=136334 But here are some pics of them done

Next I will start on the sail panel to roof seam on the right side

Here is a pic of starting the sail panel to roof seam on the right side

Here is a couple pics of welding and grinding on the right side

Got the first coat of filler on. But before ya look at the pic.................. ya gotta promise not to laugh lol. Ya know I am no body guy but I am trying to learn.

More to come hopefully tomorrow

11-10-2008

Allrighty then  
First pic is of the gap that still needed to be filled after first coat
second pic of first coat rough sanded
and some pics of the second coat of all-metal

Now my question now is, how do I sand this after second coat?

11-11-2008

Well since I gotta wait till friday for more tools and filler I might as well start on the left side sail panel to roof seam.

11-12-2008

Got the welding, grinding and fiirst coat of all-metal on the left side. Alittle sloppy but it will be ok lol

11-14-2008

Got some stuff done tonight I'm pretty happy with. Sanded the all-metal down on both sides then filled with rage gold and got the right side sanded. Maybe one more coat on the right side and that should be good. Will sand the first coat of rage gold on the left side tomorrow. These are all skim coats, they are not thick at all.

This body work stuff ain't all that bad. OMG did I say that out loud? LMAO

11-15-2008

Well finally got the final coat on both sides. Gotta wait a couple hours before sanding cause it is only 65 degrees in my garage. Prolly won't get finished pics up till tomorrow.
Might as well work on the frame connectors while I am waiting for filler to dry fully.

Ok so I couldn't wait 2 hours LOL, I started sanding and it dried faster then I thought it would   Still got a few very minor imperfections but I think the Evercoat 410 glaze-it will take care of those latter.

Got the right side done tonight too.