You must be logged in to rate content!
2 minute(s) of a 132 minute read
1-3-2020
well Im finally getting around to figuring out the image hosting issues. I think im just going to stick with photobucket and pay for it. If any of the images dont work let me know!
I have definitely made some progress since my last update.
This is the theory on my rear subframe mounts. Made from 1/4" flat stock.
tacked in
front side
tigged in! it is an absolute whore trying to lay in the trunk of a car, control the pedal with your elbow, feed filler rod, and work the torch.
and this is where it currently sits!! subframe is held in by C clamps, I have all my hardware to bold it in except for my weld on nuts which are in the mail. I might add a few extra mounts on the subframe for good measure but undecided at the moment.
just got confirmation from Art Morrison today that they can bend this in there mandrel bender. I will be placing my order for 2 of these next week. This is the front frame rail section!
Comments
Will be cool ??
Posted by Diggymart on 1/24/21 @ 2:15:42 PM
Any updates?
Posted by diyauto on 1/11/21 @ 7:46:35 PM
Thanks!
Posted by BerettaLS on 11/13/20 @ 3:47:30 AM
Impressive! Going to leave a lot of unsuspecting people in the dust with this thing
Posted by miatamatt on 11/6/20 @ 7:11:45 PM
Crazy in the best way possible.
Posted by MPower on 10/31/20 @ 3:11:38 AM
This thing is wild! That V8 fits in there nicely. Will be the ultimate sleeper.
Posted by stevegolf on 10/28/20 @ 11:34:27 PM
Any updates ?
Posted by Diggymart on 4/20/23 @ 7:08:14 PM