You must be logged in to rate content!
2 minute(s) of a 132 minute read
2-4-2018
I didnt get it finished tonight. I have a bit of diegrinding to do.. made my mounts to lower the rear subframe and started hogging out the holes big enough for a socket to fit since I dont feel like buying 10" bolts for a temp setup..
kinda ghetto, but it works for what I need.
2-5-2018
I cant wait to cut this out lol. its where I need it tho.
ride height
very rough sketch of my frame plan
next up is an alignment to double check everything is as square as I think it is. Then POSSIBLY shock mounts lol. or right to the frame! Its basically ready,,
Comments
Will be cool ??
Posted by Diggymart on 1/24/21 @ 2:15:42 PM
Any updates?
Posted by diyauto on 1/11/21 @ 7:46:35 PM
Thanks!
Posted by BerettaLS on 11/13/20 @ 3:47:30 AM
Impressive! Going to leave a lot of unsuspecting people in the dust with this thing
Posted by miatamatt on 11/6/20 @ 7:11:45 PM
Crazy in the best way possible.
Posted by MPower on 10/31/20 @ 3:11:38 AM
This thing is wild! That V8 fits in there nicely. Will be the ultimate sleeper.
Posted by stevegolf on 10/28/20 @ 11:34:27 PM
Any updates ?
Posted by Diggymart on 4/20/23 @ 7:08:14 PM