You must be logged in to rate content!
7 minute(s) of a 417 minute read
1-3-2012
As for today, we are talking head :
All moving parts went out easily:
A lot of dirt:
Needs a clean-up, and a refresh:
Poor valves, dirty ones...:
All this looked as new, my guess is that the head have gotten some new parts not long before I bought it.
But... I bought 12 valve guides from VAC, in original size (8,0mm) of course...
Five of the exhaust valves are oversize 2 (8,2mm), and one is standard (8,0mm).
So the I had to get hold of five new exhaust valves, due to the motorshop where I am going to have my valve guides replaced do not have 8.2mm Brotch.
I measured the guides, tolerance-spec says 0,8mm - and this valve has a movement of 0,7mm - so I want to replace them all...
First of all, I needed to make sure the surface is clean and straight.
Before:
After:
They machined 0,15mm off the head, so that was not too bad for a 6-cylinger head...
Even more clean...
Valves needed cleaning
After some cleaning:
Atleast looking better:
This is how I stand per today 04.01.2012. I have sent the head away to get following work done:
- Grinding valve seats (Mira) 3-angle
- Replacing valve guides (VAC Motorsport edition)
- Valves final clean-up and machined
So now I am just waiting for the shop to get finished, I really want to get the head assembled and into position...
Sorry, I forgot... I did some small things too...
I had to finish the Alpina-tank vent system...:
Hoses correct measure, and attached:
Looks almost as original?.
Remember my old battery-tray?
Bought one from a user in here, thanks a million!!!
NICE!!:
Primed:
Looks even better with color?
Into position:
I like what I see, compared to the old rusty fart:
Carpets in position. Looking bad, but they are the only ones I got. Anyone parting out a M5 trunk carpeting?
And finally, the last door came from paint-shop, ready to rock'n roll!!
Almost getting the E28-feeling back now...
And some off topic...
As you might remember, X-mas was just here...
Here is my little boy getting his present for Xmas
His sister was exited too, and wanted to help him out - all went too late she thought.
Try out...
Mistake... He was sitting there for the rest of the night... Honestly, I think it is a good thing...
Love the Bimmers!
Posted by Diggymart on 1/26/20 @ 11:36:41 PM