Finally started ordering parts for the swap by 6MTUA5

2 minute(s) of a 55 minute read

Looks like it did come with the bearing and fork in there; the bearing looks nasty.

Keep in mind that this is the stuff I needed.


PARKING BRAKE
54116-SV4-000 PIN, LINKAGE
54357-SF1-003 PLATE, CHANGE WIRE
54118-S10-000 WASHER ASSY., WIRE

CLUTCH SLAVE/MASTER CYLINDER LINES
46942-S5A-003 PIN, SNAP
46943-S5A-003 SEAL, RING
46944-S5A-J01 CONNECTOR
46911-S70-003 PIN, LOCK (8MM)
46912-S84-A00 PIN, CLUTCH PEDAL
46928-S3M-A01 SEAL, MASTER CYLINDER
94070-08080 NUT-WASHER (8MM) X 2
46971-S3M-A01 TUBE, CLUTCH FLUID

CLUTCH PEDAL
(if you get the whole clutch pedal assembly you probably won't need most of this)
92201-10070-0J BOLT, HEX. (10X70)
94002-12080-0S NUT, HEX. (12MM) X 2
94050-10080 NUT, FLANGE (10MM)
35710-SE3-A01S WITCH ASSY., CLUTCH (12MM) (INHIBITER)
36760-SM4-003S WITCH ASSY., CLUTCH
93403-08016-08 BOLT-WASHER (8X16)
46981-SR3-930 BUSH A, ASSISTANT CLUTCH X 2
46911-SD4-930 BUSH, PEDAL PIN
46907-SR3-010 SPRING, CLUTCH ASSISTANT

1-31-2008

Random Technology High Flow Cat, hardware kit and 02 extender

2-1-2008

Got my Innovative motor mounts from Excelerate in today 

Notice the front mount is a little taller than the rear