You must be logged in to rate content!
4 minute(s) of a 411 minute read
6-12-2019
Found the voltage at the pump is 7-8 VDC. Going to add a dedicated frame ground and tie the pump harness to that.
6-20-2019
Sending unit came in.
Other pics.
6-24-2019
Started putting my Reid knuckles together but ECGS sent the wrong spindle studs. A quick email and they have new studs in the mail. Great customer service.
6-25-2019
Put a new fuel filter in...only to have the rubber fuel lines leak. Need to get new hose.
Anyway, here is the gas from the old one...
6-29-2019
Progress.
After a few fuel line failures, I broke down and bought this...kept blowing lines when I replaced the fuel filter
6-17-2019
Some axle progress...
6-20-2019
Thanks guys. Picked up an OEM radiator from an '87. All brass, just has some deposits.
6-21-2019
Shop is happening. Here are chunks that came out after soaking with CLR and distilled water.
7-22-2019
Chipping away at the axle. I need to pick up some bearing grease.
7-26-2019
Take your Jeep to work day.
7-27-2019
New to me OEM brass radiator. Had it rodded out at a local shop.
But still getting over heating. Probably due to this beast...
7-28-2019
This thing is f'in heavy.
Nice build!
Posted by Diggymart on 5/21/20 @ 3:51:26 PM