You must be logged in to rate content!
3 minute(s) of a 84 minute read
3-30-2019
Still need to grab another switch and light. Il probably just get a hand full of each. Im sure il need more later anyways. But the wiring for the panel is finished.
4-1-2019
Some where in the build thread I have a picture of the winch I picked up for it. Has been sitting in a box under our fire place ever since. So I pulled it out along with the mounting plate to see what I need to get it wired up and mounted. I want to add an in cab in/out switch for the winch sk il have to grab one of those soon. It came complete with a fairyland, cable, hook and cover. Has some mounting bolts but I'm probably going to grab some grade 8 bolts to be safe. It's a runva 12500lb winch.
I don't think im going to use the quick disconnect conector on the winch. As long as the cables reach the battery I wont be anyways. I was thinking of using the connector on my 2nd alternator for the welder set up I want to build for it. this way when I want to weld I just plug in the cables and turn it on.