Accord325 Dyno Progress and Build

4 minute(s) of a 88 minute read

I was at the store and figured I should pick up some parts for my car. Obviously joking, but I really think I need to stop buying $hit.....Nahhhh. Anyone in FL want to help install all this ? Free Liquor, Beer, and Wings.

- 09' MDX Heads (Ported, Decked, 5 way valve job Intake Side, 3 way valve job Exhaust side)
- TLS Exhaust Srpings
- MDX Ported Runners
- 08' RL Cams
- RDX 410cc Injectors
- Invoative 75A Motor Mounts
- RV6 PCD (Ceramic Coated)
- Water Pump, Timing belt kit
- Accessories for install

2-7-2014

The work began last night. Due to time I have to do this in chunks. Hoping to have it complete by the end of the weekend. It's not a one and done job as it usually is. I have a BUNCH of stuff to switch over. Also had to port match the holes on the P2R thermal gasket to match the runner size.

2-11-2014

Stock Injectors vs. RDX 410cc

If your not using TC clips, cut the bottom of the clip as shown to fit the RDX injectors

Breaking her open

Stock Mount vs. Innovative 75a mount Yeahhh, I think this mount was shot. Maybe a cause of some of my traction problems.

VIDEO
http://s1274.photobucket.com/user/ac...50011.mp4.html

Front main seal - which looked fine, still replaced it

Heads coming off

Head comparison - J37A1 Left , J30A5 right. Dont see a huge difference on the outside, but appears to be large in the interior and I'm not talking about the porting.

Runners - J37A1 Left , J30A5 right. Hopefully Bozo sees this a finally gets what i was saying about the port shape !!

My timing belt looked brand new. Whatever, changed it anyways.

HEADS BACK ON, DOING VALVE ADJUSTMENT!! Need Fluids and hopefully she runs right.