You must be logged in to rate content!
3 minute(s) of a 183 minute read
3-19-2012
Got a bit more done this weekend.... trying to cross a bunch of the small stuff off the list.
Dash and glovebox before:
After:
Then I cut the firewall to make a removable panel for attaching throttle linkage/IC piping etc. The cuts look crooked but its just the angle:
Then I made an alluminum panel to bolt on:
The Panel bolted on from inside and out:
Next came smoothing out the strut towers and filling the millions of holes ford puts in them They obviously still need body work but the holes are filled for now anyway.
Pulled the doors off:
After doing this by myself I was glad I was doing the next step, Cutting some weight out:
Then I started masking stuff for the next step which is High build primer/block sanding:
More updates soon!!! Engine is at the engine builders now and heads/rockers should be here early this week
This is great!
Posted by Diggymart on 11/3/20 @ 5:48:21 PM