You must be logged in to rate content!
1 minute read
ARMREST COVER Focus 11-18
1. Installing the armrest cover requires removing the armrest lid from the car (there are screws visible by the hinges after you open the lid).
2. You then need to separate the top and bottom part of the armrest by removing the screws hidden under the little rubber caps. Once the two halves are separate, wrap the armrest cover around the top section of the armrest lid.
3. Then re-assemble the lid, making sure the leather stays nice and tight in the process. It does help to use drops of glue in sensitive spots, to make sure the leather cover remains tight, flush and straight during the re-assembly. If you don't care about the leather cover being removable later, you might even consider glueing it (with Contact Cement or similar glue) on the entire perimeter of the sides of the armrest lid.
4. Once this has been completed, reinstall the armrest back into the car.