You must be logged in to rate content!
2 minute(s) of a 36 minute read
4-19-2020
The car now has a radiator so I can leave it running, the turbo is not attached but the maf is connected to the intake. All air leaks blocked and running nicely
Well I tried, packing the car away after working on it, tried to drive it into the garage. The clutch is spongy and I couldn’t engage gears, brakes weren’t much better. The only way to stop moving was turn off ignition
4-22-2020
Yes it did, 0 -100 mph without moving an inch. Brakes and clutch bled and filled with nice new dot 4 fluid. All other stuff flushed out. Sounds sweet, turbo pipes coming later this week. Also handbrake works :)
So tonight I finished off the handbrake and it rocks. Fully adjustable and a clone between the Audi system (rear hubs and handbrake cables and the spitfire lever). I’ll clean it all up at the weekend and make it look nice.
I also bled the brakes and clutch, the stuff that came out was a horrible milky colour! It wasn’t like that when it went in 2 weeks ago. Anyway flushed it out and filled with dot 4.
I then went for a drive, at one point hitting just under 100 mph. There is no noise from the drive train, it sounds so sweet. Checkout the video ?
I get the induction pipes later on this week so I can then plumb in the turbo.
Comments
It's good to see someone modifying a triumph - the time put into sorting the panel gaps has paid off!
Posted by Jim_builds on 10/26/20 @ 1:10:48 PM
What a transformation! If Triumph were making cars today I could see them building something like this.
Posted by CCmyVW on 10/25/20 @ 1:14:55 PM
Wow impressive!
Posted by Diggymart on 10/11/20 @ 2:08:22 AM
You really are an artist with the welder. Looks like a modern version of a classic design. Well done!
Posted by miatamatt on 10/9/20 @ 1:07:39 PM
Nice work! definitely not something you see everyday.
Posted by MPower on 10/1/20 @ 7:51:48 PM
Beautiful car, bet it’s a riot to drive
Posted by stevegolf on 9/26/20 @ 3:33:18 PM
Great to see this again!
Posted by Diggymart on 3/7/21 @ 5:47:46 PM