You must be logged in to rate content!
3 minute(s) of a 177 minute read
12-14-2010
not much has happened but ive got a growing pile of parts in the bedroom so hopefully over the christmas holidays ill be able to get some things done.
12-20-2010
quick update, ive maganed to get out in the snow and get some bits done.
first job was to get the rotten rear subframe out.
all 4 or the rear bolts were rounded off by the previous owner which made the process horrid. but with some swearing and persistance we managed to get them out. then onto the front 4 which came out pretty easily besides one shearing.
so off came the subframe.
this is probly the worst area.
deffinitly not worth using again so ill be buying a new bare subframe over xmas.
can anybody tell me if these little felt pads were standard as they have rusted a hole into my rear seat
so with that out i moved onto the a panels and flitch panels, as usual found some nasty repairs which will have to be fixed
next job was to try and finish off repairing the damper mounts but to be honest it got so cold i didnt want to do anymore
so this is as far as i got
nearside rust cut out ready to be replaced -
and the first layer on the offside -
Nice build!
Posted by Diggymart on 11/26/21 @ 8:22:03 PM