The Van by Tom Sanderson

6 minute(s) of a 112 minute read

More blasting, I'll let the pictures do the talking

8-12-2014

Finally got all the sand blasting finished off this weekend :)

8-26-2014

There was a little bit of rust at the back of the roof so I got a section welded in there and I also got the upper frame part joined together ready to go in.

10-3-2014

Not updated this for a while, I have got the rear gutter section welded in now and one side corner shaped, just need to add a tab on the inside for the rear door latch

10-11-2014

Made a start on the filler work today, I started on the worse aeras first

And after lots of sanding I ended up with this

Once I had done with the filler I have to whole panel a coat of self leveling finishing glaze to remove any smaller imperfections in the panel

I guide coated it and flatted it down, the guide coat helps you to see when you have got it all



One it was all done it looked like this

Then a bit of primer just so I could have a quick visual check on the repair

Just got the rest of the car to do now! Luckily most of the bits are new so it won't be too bad.