Mini Thirty 998 Project by Andrew O

By diyauto
( 2 )

5 minute(s) of a 148 minute read

3-31-2013

Right, long over due update.
Been cracking on with various things

Wheel arches in High Build -
Very pleased with the finish on these.


Posted Image

Posted Image

They were then rubbed down and painted -


Posted Image

Posted Image

Posted Image

Posted Image

Also fitted this -


Posted Image

Got the indicators fitted although they are not wired up yet -


Posted Image

Posted Image

Thats it for now. Need to get the head unit and amp fitted and wired in and i need to buy some rear seats.

Whilst looking through some old photos my Mum found this photo of her wedding day and wedding car .... -


Posted Image


Safe to say it was a very long time ago.

Would love to hear your comments as always.


4-11-2013

Many many things have happened :D

Mr Royal Mail arrived with one of these ready for some flatting and mopping -


Posted Image


So... Quater panel flatted back with 1500 grit wet and dry -


Posted Image

Then polished up with some G3 cutting compound -


Posted Image

Looks pretty good and is nowhere near its full potential yet -


Posted Image

Flatted the boot ( Again with 1500 ) -


Posted Image

50% done -


Posted Image

Posted Image

Then the roof got attacked -


Posted Image

:o -


Posted Image

Took the wheels off and polished them up and then sealed them with Gtechniq -


Posted Image

Beading -


Posted Image

Got me some arches fitted ;) -


Posted Image

Used stainless steel screws -


Posted Image

Wheels back on ( It desperately needs lowering, rocking the 4X4 look ) -


Posted Image

Tyre writing -


Posted Image

Posted Image

Trim fitted :D -


Posted Image

Over and out for now.
Got both seats test fitted today and the 12V lighter wired in ( All done by my Dad )



Comments

Great Mini build!

Posted by Diggymart on 5/28/20 @ 6:38:38 PM