You must be logged in to rate content!
3 minute read
Battery Removal for 2008 Sebring
Compliments of saltydog @ https://www.allpar.com
1-5-2013
Jack the car up and remove left front wheel....
Remove ground cable using 15mm socket.....
Using a 7mm socket, remove the screws that hold shield in place....
Remove all six push pins....
Using a 13mm socket remove lower bolt & using a 10mm socket loosen the terminal connections...
Then move bracket to this position...
Using a 13mm socket, remove battery hold down...
Install new battery and reinstall all that was removed..
And a full Wax just because black beautiful!
And a full Wax just because black beautiful!
1-5-2013
Also, if you live in the rust belt, I would recommend painting or using some anti rust spray. Too me this seems like there is not much protectant on the tray and surrounding area.
1-24-2013
As Doug mentioned, it possibly could be done by cranking the wheel to the right, but this is more involved than pervious J cars. I like to have room to work and I don't take chances on scratching or braking anything.
The tires are Generals and love them! So much better than the original Brigstones. Better handling as we
