You must be logged in to rate content!
4 minute(s) of a 42 minute read
8-2-2012
Since the Renown LP570-4 bumper is longer than the stock 04-08 I had to fabricate radiator ducting extensions to make sure that the air would be driven to the them. First I made some cardboard templates, cut them on ABS plastic, fit them and trim them into position, to then re-paint the fabricated panels and installed them on the car all with stainless steel hardware.
I designed them in two peaces, the ducts stay in the car screw into the OEM ducts and the two outer peaces that I will be attaching to the bumper with fiber glass; at the same time I took advantage to re-install the K40 Laser difusers and the Laser Pro Hammers built into the bumper.
More pics of the process...
8-6-2012
Started getting the bumper trim to relocated the heat exchanger to the middle of the bumper seeking better air flow.
The LP570-4 rear diffuser is finally here; I will be trimming it to fitted in the car; hopefully will get better airflow into the engine bay...
I have finish with the bumper and all of the underbody panels, the rear LP570-4 under mound diffuser fitted perfectly, I even open some slots to be able to strap the car down in case of a towing or dyno day.
Also bleeded the brakes with Super Blue racing fluid, fill the Redline gear oil to the transmission and front differential, Mobil 1 on the engine.
