You must be logged in to rate content!
4 minute read
DIY: Rear Wheel Hub Assembly
Compliments of KrayzieDxC @ http://acurazine.com
8-29-2008
DIY: Rear Wheel Hub Assembly
Tools needed:
1. 12mm wrench or Rachet or socket (for calipers)
2. 14mm Wrench or Rachet or Socket( for calipers)
3. Hammer
4. 32mm (to remove spindle nut)
5. Electric Impact Gun (Love this Gun)
6. Philips screw driver
7. Flat Head screw driver
7. New Wheel Hub Assembly
1. Jack up your car
2. Take off your wheel, i used a impact gun,disregard the spindle nut ,thats coming up
3.Let take off this cover off with a flat head screwdriver ,bang it out with a hammer and pryed it off
4. You see your 32mm spindle nut .Now find your dented nut and pryed it up so you can unscrew this
5. You cant take off that nut, other wise it will spin, so Put your wheel back on, 3 lug screw is okay. Drop your car down. Now lets take off that nut, grab your 32mm socket wrench or your impact gun, and reverse it. now jack up the car off the ground
6. Take off your calipers ,either way you can take off the break padd bracket or the full calipers. with your 12mm and your 14mm nutz screws. dont let it hang i let it sit on a tool box
7.On your rotor tap the + with a hammer so your can unscrew that screw, now your rotor is free and you see your wheel hub assembly
8. take off your spindle nut, i think your already did it, but it should just come out freely by itself
9.my garbage mess up threads screws
10. Grab your new wheel hub assembly, slide that in and grab your 32mm socket and tap it in with a hammer or wood block
Comparasion
------Now just reverse
