You must be logged in to rate content!
1 minute read
Tyler Sandau one of our engineers at Motion shows you how to use a Motion Raceworks timing pointer to verify and set TDC on your LS engine on this weeks Tech Tip Tuesday.
What you'll need
-An LS engine
-Piston Stop
-Motion Raceworks Timing Pointer
-Pen and Paper
-Some simple math
Equation:
( Stop 1 + Stop 2- 360 ) / 2 = X ( in degrees)
Our goal here is to find out exactly where TDC and then set a zero on your balancer. This way when you fire up your engine and command a certain timing, you can verify that it is delivering the correct timing vs commanded.
This is imperative to make sure you are tuning safely and accurately as a few degrees one way or another on a high performance engine can be either giving up horsepower or detrimental to its longevity. Never trust the number on the screen until you do this!
For a link to Motion Raceworks timing pointers, click below!
https://www.motionraceworks.com/collections/timing-pointers
For Instructions and the Equation for setting up the Timing Pointer Click this link
https://cdn.shopify.com/s/files/1/0043/6807/2822/files/Setting_TDC_on_a_Balancer.pdf?v=1585062801
Questions: shoot us an email to [email protected] or call (800) 878-9274