You must be logged in to rate content!
2 minute(s) of a 891 minute read
12-4-2017
Yeah I've actually already done that, I clipped the edge of the fender lip from 10 o'clock to 2 o'clock, when viewed from the side. I trimmed the lip from maybe 3/4" wide down to 1/8" wide, so now the tire rubs on the formed bend just above the lip area. I'll look for some pics of what I've done. Andyeah, the buttonhead is a good idea.
I think I'm going to end up trimming the inner fender right where it starts to be covered by the outer fender on the engine bay side, and make everything that's hidden be just a big cylindrical barrel for tire clearance. Extend that barrel laterally all the way to the inside face of the outer fender, then extend it down to the fender lip making it hug the outer fender as tight as possible. I've seen this mod before, but I can't remember which forum/thread.
12-10-2017
Alternator bracketry wrapped up and ready to install on car this weekend. I'll then pull the P/S pump bracket and trim it down since it no longer needs to support the alternator.
STILL waiting on the turbos.. I guess it's been less than 2 weeks but man are they hard to be patient for!
Wow thanks for sharing!
Posted by Diggymart on 3/3/19 @ 12:40:25 AM