LQ4 into a 3rd Gen/1972 Nova by frojoe

2 minute(s) of a 891 minute read

Got the underhood wiring completely wrapped up today. Took inspiration from a couple OEM harnesses I've taken apart, using a trimmed plastic tube to support the main loom that travels above the passenger valve cover...

Got the engine bay essentially buttoned up for good, short of the oil breather, clutch bleed, and the intercooler. Charge piping is all made up and all the ancillary sensors are wired, just need to weld the intercooler top tank onto the core and install it for the final time. Motor oil, coolant, and P/S fluid is all in... all that's really left to do before I test fire it up is prime the fuel system and set the fuel pressure, then download the new 4.0 firmware onto the Dominator ECU and load my tune onto it....